Case studies – Leak Detection

Polygon ensures Archbishop of Canterbury’s residence remains unflawed

The damage suffered due to leaking pipes should not be underestimated — a 0.5mm leak could lose 20 litres of water every hour. Even if a leaking pipe is noticed, the cost and disruption associated with locating the source could be considerable. Too often walls, floors and even other pipes are unnecessarily damaged and there are no guarantees that the leak will be found as it is very often some distance from any signs of any water damage.

Problem

Lambeth Palace is the official residence of the Archbishop of Canterbury. It features over 600 rooms and contains around 300 radiators.

In the coldest December on record to date, a leak caused around 20,000 litres of water to be lost from the central heating system. Inevitably the system then stopped working. Heating engineers were initially called in but after several days of investigation they were unable to find the source of the leak. Polygon then was appointed to detect the leak.

Solution

Together with the heating engineer, the Polygon technician quickly identified that one of the four boilers serving the Palace was losing pressure. This logically enabled them to isolate the broad area of the leak, as each boiler served a specific circuit.

The areas affected included the crypt, administration offices, toilets, art gallery and stone floored library.

Tracer gas was specified as the fastest and most effective technology to trace the leak and with the limited reserves of gas available so close to Christmas, the technician was able to detect a slight trace in the under-floor void which indicated a possible leak in the foyer to the crypt.

Three technicians and a large supply of tracer gas were then deployed to the site. Using a combination of gas, acoustics and videoscope, the technicians were able to detect the precise location of the leak within three hours.

Benefits

  • Non-destructive testing solution ensured that this historic building was not damaged and excavation work was minimised
  • Polygon had the necessary skills to deliver a rapid, robust, cost effective and efficient response
  • Increased detection speed resulted in less interruption and associated costs.
Call us today on

033 033 27861

Why us?

Why Polygon?

Not only do we have a deep understanding of heating, drying and measuring construction sites, we work in conjunction with the UK Centre for Construction in Buildings http://www.ukcmb.org/. This enables us to deliver a knowledgeable cost effective solution.