Notice
You are now leaving Polygon Restoration's website and will be directed to another country in the group.
Do you want to proceed?
Protecting people and the environment in industries like offshore and petrochem has become increasingly vital. While we can control climates in harsh conditions, accidents still occur, sometimes leading to catastrophic events, loss of life, and environmental damage. A key step toward safer workplaces was the introduction of two ATEX Directives in the mid-90s, which became mandatory in 2003.
In the United Kingdom the requirements of Directive 99/92/EC were put into effect through regulations 7 and 11 of the Dangerous Substances and Explosive Atmosphere Regulations 2002 (DSEAR).
In DSEAR an explosive atmosphere is defined as a mixture of dangerous substances in air under atmospheric conditions in the form of gases vapours mist or dust in which after ignition has occurred combustion spreads to the unburned mixture. The requirements in DSEAR apply to most workplaces where a potentially explosive atmosphere may occur. An integral part of the ongoing oil and gas production is the requirement for ongoing vital maintenance programmes where specific activities require a controlled environment whilst work is being undertaken.
Polygon, a world leader in controlling atmospheres in a wide variety of industries, was approached by a number of Specialist Protective Coatings Companies, to develop a range of ATEX environmental control equipment as an urgent need to provide an intrinsically safe solution that would meet ATEX Zone 1 and Norsock (Norwegian Standards) requirements. The Polygon ATEX solution provides dry conditioned air to areas that need a high level of environmental control, for example blasting and painting central column trusses found on oil rigs. The units can also be used on shore where petrochemical tanks are being recoated. Having the atex dehumidifier unit means that the unit does not have to sit in a safe zone at a distance from the tank but can be positioned next to the tank safely. One of the many features of Polygon’s fleet of ATEX equipment is “Plug and Play” which makes it faster and easier to start operating.
Not only do we have a deep understanding of heating, drying and measuring construction sites, we work in conjunction with the UK Centre for Construction in Buildings. This enables us to deliver a knowledgeable cost effective solution. http://www.ukcmb.org/
Emergency call 24hr service
03303 327 861Send message
uk_sales@polygongroup.comDirect Reaction Team
We are ready to respond on short notice to ensure that real estate and other property restored to its origins in the fastest possible way. We do a quick assessment of the damage to be able to take the right actions.
Your questions and comments are important to us. Select a topic and fill in the contact form. We´ve everything covered for your needs!
Polygon UK
Blackstone Road, Huntingdon, Cambridgeshire, PE29 6EE
Phone: 033 033 27861
Email: cds@polygongroup.com